This is a medium sized, floor standing pillar drill. Cast iron and machined steel giving high strength, reliability and stability. It has a highly accurate chuck spindle assembly, running in NSK ball race bearings. Powered by a smooth running 750W induction motor, there are 12 belt speeds from 120 to 2,580rpm. The belts are of the multi-vee type for maximum grip and low vibration. The belt cover has a safety switch to prevent the drill being run with the cover open. The down feed is via a one-piece cast iron handle with soft rubber grips and there is an accurate drilling depth control. A quality 1-16mm keyless chuck comes as standard. The chuck guard is electrically interlocked for safety. The switch system has a separate locking emergency stop switch, plus a separate switch for the LED work light. Table height is controlled via a rack and pinion system; the whole table assembly can be swivelled away to allow the base to be used as a work support. A great choice for any trade or school workshop looking for a great performing floor standing pillar drill. Please note, this machine must be bolted to the floor for safe working.
Base Size | 520 mm x 320 mm |
---|---|
Chuck Capacity | 1 mm to 16 mm |
Chuck Travel | 80 mm |
Chuck Type | keyless |
Diameter of Column | 80 mm |
Max Chuck to Base | 1,150 mm |
Max Chuck to Table | 700 mm |
Max Drilling Mild Steel | 25 mm |
Morse Taper | 3 MT |
Nett Weight | 108 kg |
Overall L x W x H | 750 mm x 430 mm x 1,650 mm |
Plug Fitted | UK 3 pin plug |
Power | 750 W |
Rating | Trade/Professional |
Speed Range | 120 - 2,580 rpm (10) |
Spindle Taper | 2 MT |
Table Size | 345 mm x 345 mm |
Table Tilt | 45° - 0° - 45° |
Throat Depth | 216 mm |
Voltage | 230 V |