A good value-for-money disc sander which will be a great asset in any hobbyist's workshop. The 300mm disc is driven by a quiet 750W induction motor and takes the full range of our 300mm diameter self-adhesive discs. Tip!Self adhesive discs can easily be removed complete with their glue by gently warming with a hot air gun before removing. The motor is controlled by a no-volt-release switch and there is a brake provided to slow the disc down in a reasonable time. The cast iron sanding table has a ground top surface and is provided with a slot for the adjustable mitre fence, used for end grain sanding. The table tilts to 45° and is firmly locked in position with heavy duty handles at both ends. Dust is extracted from the bottom of the disc via a shroud which terminates in a 63mm diameter outlet. A 450mm length of flexible hose is provided with the machine; this has a 60mm diameter sleeve at the end which will connect directly to an extractor.

Axminster Hobby Series Rating

• Where: Home, workshop, shed
• Users: One person for light work
• Spec: Lighter build spec, lower power
• Annual use: Max 100 hours
• Guarantee: 3 Years

Lower power ratings and tool capacities.

Lighter build specification.

Generally used for light work, occasionally heavy work, to the tool's limit.

Used in the home (garage, workshop, shed), kept dry, clean and well looked after.

Not part of the tool complement for income generation.

Very few (if any) continuous work periods.