Search
Go

Free Click & Collect                    -                    Easy Returns

Axminster AHRD16B Bench Radial Drill

€417.72 Inc Vat

Axminster AHRD16B Bench Radial Drill View Large Image
101928

Features

  • Medium sized radial bench pillar drill for hobby use, all cast iron construction
  • Smooth running 370W induction motor, 5 belt speeds 500-2,450rpm
  • Highly accurate quill with the spindle running in genuine NSK ball bearings
  • Convenient rack and pinion table height adjustment
  • Fitted with soft grip rubber feed handles, and a quality 3-16mm keyless chuck
  • Features include belt cover safety switch and emergency stop switch
Out of Stock
See Alternative
Title Quantity Price Availability
Axminster AHRD16B Bench Radial Drill €417.72 Inc Vat Out of Stock
Add To Basket Add to Wishlist

This is a truly universal drilling machine that will be an asset to any home workshop. Perhaps the most outstanding feature of the machine is the variable drilling width capacity of between 210mm and 420mm, measured from the centre line of the chuck to the front face of the column. This allows a maximum drilling width well above normal drill press capacity which, coupled with the ability to vary the drilling angle, gives the machine a high degree of versatility. The horizontal movement of the head is controlled by a rack and pinion system which can be firmly locked in position. Tilting is easily achieved by undoing a locking knob at the top of the column, setting the required angle against a scale and re-locking the knob. There is a positive locating pin which runs in a keyway on the horizontal bar to ensure that the head returns exactly to the vertical. The 370W induction motor drives the drilling head, equipped with a 3-16mm keyless chuck through a V belt and a choice of five pulleys giving a speed range of (5) 500-2,450rpm. In other respects this drill press is similar to the standard models, with an accurate quill and fitted with rubber down feed grips, NVR switch, chuck guard and belt cover safety switch. One word of warning - the chuck is located in the drive quill with the conventional Morse taper which requires an axial loading to keep it securely in place; if the head is used in the horizontal position together with a sanding drum or polishing mop, there is a risk of the chuck coming loose. Please note: the morticing attachment is not suitable for this machine.

Axminster Hobby Series Rating

  • Where: Home, workshop, shed
  • Users: One person for light work
  • Spec: Lighter build spec, lower power
  • Annual use: Max 100 hours
  • Guarantee: 3 Years

Lower power ratings and tool capacities.

Lighter build specification.

Generally used for light work, occasionally heavy work, to the tool's limit.

Used in the home (garage, workshop, shed), kept dry, clean and well looked after.

Not part of the tool complement for income generation.

Very few (if any) continuous work periods.


Base Size 450 x 270mm
Chuck Cap\Type 3 - 16mm keyless
Chuck Travel 80mm
Collar Size 55mm
Diameter of Column 60mm
Drilling Capacity 13mm Steel
Height 790mm
Max Chuck to Base 375mm
Max Chuck to Table 220mm
Model AH16RD
Morse Taper 2MT
Nett Weight 37kg
Overall L x W x H 840 x 320 x 790mm
Power 375W Input, 280W S1 Output (230V 1ph)
Rating Hobby
Speed Range (5) 500 - 2,450rpm
Table Size 230 x 210mm
Table Tilt -45° to +45°
Throat 420mm
Clear All

Your Recently Viewed Products

Oops! Something went wrong there and we were unable to load the page you requested.

Sign Up