A sturdy and robust machine, fabricated from heavy gauge steel plate and cast iron components. Versatile, because the belt arm can be used in any position from horizontal to vertical. The whole belt arm pivots around a very large flange with a graduated scale and the outer end of the belt drive roller is supported in its own ball bearing assembly. Fitted with a very comprehensive guarding system that allows the operator to expose only the amount of sanding belt required, but still allowing very easy changes of the belts. This machine has a large cast iron sanding table, which tilts from minus 15° to plus 45° and gives great support. When used as a linisher in the horizontal mode, the guarding can be removed to expose the maximum amount of belt and a fixed work stop is provided. The close fitting guarding coupled with two 62mm dust outlets will give exceptional extraction when attached to a suitable fine dust collector. Uses standard 150 x 1,220mm abrasive belts.
Continuously rated high power and heavy duty construction. Usually used in medium-sized enterprises such as building companies, carpentry workshops, schools and colleges. Intended for site and workshop use. Used up to the tool's limit with some large and heavy continuous work periods. Considered an essential tool for income generation.
Belt Size | 150 x 1,220mm |
---|---|
Belt Speed | 750 m/min |
Dust Extraction Outlet | 2 x 62mm |
Model | BS648 |
Nett Weight | 50kg |
Overall L x W x H | 500 x 550 x 790mm |
Power | 750W 230V 1ph |
Rating | Trade |
Table Size | 310 x 160mm |
Table Tilt | 15°-0°-45° |