The Powermatic 719-T is a floor standing morticer with a 25mm capacity. It is heavily built in cast iron with a welded steel cabinet base.
The unique screw and fast action nut allows the material clamp to be set across its length in seconds. With fully adjustable slideways, the morticer table has travel in both directions with a lock on the fore and aft setting. The main operating handle has a clever ratchet setting which allows it to be quickly set in a choice of 6 positions for optimum leverage. The headstock is supported by a gas strut which gives a smooth and controlled downward plunge action. The depth stop is simple and very effective to use. Along the back of the main table is a mortice length setting device which allows the mortice length to be pre-set for reduced marking out. The table also tilts upwards to any angle between 0°-35°, very useful for angular frame construction. The column can be rotated through 180°to allow the morticing of door locks, a very useful function. The cabinet base is fabricated from heavy gauge sheet steel and incorporates a cupboard with shelf in the base for storage of chisels, bits and service tools. Bushes are provided for 3/4", 13/16" and 1.13/16" shank chisels.
Supplied with cabinet base, chisel bushings and service tools.