View Large Image
Typical Application:
Suitable for application to all indoor wooden floors and -stairs. Only for interior use. Resistant to normal domestic wear and tear.
Product Features:
Woodoc 25W creates a clear ultra matt finish. It is a remarkably tough, wear- resistant floor sealer and lends a characteristic deep polished/natural matt look to floors.
NOTE: Wooden floors treated with Woodoc 25W should not be washed with water and detergents/soap. Clean with a damp cloth.
Woodoc 25W is a water borne floor sealer suitable for all type of wooden flooring and wood where a tough scratch-resistant surface is required. Suitable for application to all indoor wooden floors and stairs. Woodoc 25W creates a clear or white glossy or matt finish. It is a remarkably tough, wear- resistant floor sealer and lends a characteristic deep polished/natural matt look to floors.
Woodoc 25 water borne is very easy to apply as it is very low-odour and brushes can be easily cleaned with water. It dries quickly enabling a three-coat application in 1 day and is remarkably tough and durable when cured. It does not yellow with time and can be coloured with any of the Woodoc add-in colours.
Please note that due to the nature of the Ultra Matt product, its use on dark wood flooring may result in any scratches showing up more prominently. These can be easily touched up to restore the finish.
The Ultra Matt Story
We were challenged by our customers to develop a product that would be water resistant, alcohol resistant, heat resistant, tough and nearly invisible. Time and again we heard stories of intallations of very pale woods used in staircases, center-piece tables and sweeping floors where the customer loved the look until the finish was applied and the light, raw look disappeared. After more than five years of research and development, we are proud of our answer to this challenge: Woodoc Water-borne Ultra Matt. We are very excited to bring this to market and answer the needs of our most discerning customers.
Name: Woodoc 25W – Water-Borne Wood Floor Sealer - Gloss or Matt (Clear or White)
Description: Gloss or matt finish
Coverage: First coat 10-12 m2 /litre. Subsequent coats 12- 14 m2 /litre. 3 coats (average) 3,3 m2 /litre.
Application: Preferably by brush. Clean brush with water before dry.
Dilution: Do not dilute product.
Drying Time: Drying will vary, depending on moisture and atmospheric conditions.
Product Properties: Clear or White, lead-free, indoor wood sealer. Formaldehyde-Free.
Wax Content: None.
Compatibility: Water.
Non-Compatibility: Acetone, Lacquer Thinners, Benzene and other solvents.
Packaging: 1 litre and 5 litres (20 litres available on request.
