Enables mortise & tenons and dowel joints to be cut with a router.
Material thickness min. | 12 mm |
Material thickness max. | 47 mm |
Tenon thickness min. | 4.8 mm |
Tenon thickness max. | 16 mm |
Tenon width max. using vertical guide+ | 90 mm |
Tenon length max.++ | Approx. 25 mm |
Mortise length max. using vertical guide+++ | 90 mm |
Angle tilt compound | -10 degree to 45 degrees |
+ on end of 100 mm wide material. | |
++ depends on cut length and plunge depth of the router. | |
+++unlimited if vertical guide removed and wood repositioned. |