View Large Image
This is the smallest of our bench top Trade Series pillar drills. Robustly made from cast iron and machined steel, it has a highly accurate quill and spindle assembly, running in NSK ball race bearings to ensure consistent drilling. Powered by a smooth running 550W induction motor, there are 12 belt speeds between 210-2,580rpm. The Japanese made belts are of the multi-vee type, chosen for maximum grip and the lowest level of vibration. The belt cover also has a safety switch to prevent the drill being run with the cover open. The down feed is via a one-piece cast iron handle with soft rubber grips and there is an accurate drilling depth control. A quality 3-16mm keyless chuck is fitted. The chuck guard is electrically interlocked for safety and is easily adjustable for height. The switch system has a separate locking emergency stop switch, plus there is a switch for the integrated LED work light. Table height is controlled via a rack and pinion system; the whole table assembly can be swivelled away to allow the base to be used as a work support. This trade rated drill offers a whole lot more but is still compact in size. A great choice for any trade or school workshop, or maybe the discerning home workshop. Please note, morticing attachments are not suitable for this machine.
| Base Size | 420 mm x 250 mm |
|---|---|
| Chuck Capacity | 1 mm to 16 mm |
| Chuck Travel | 80 mm |
| Chuck Type | keyless |
| Diameter of Column | 70 mm |
| Max Chuck to Base | 530 mm |
| Max Chuck to Table | 340 mm |
| Max Drilling Mild Steel | 16 mm |
| Model | AT340PD |
| Morse Taper | 2 MT |
| Nett Weight | 63 kg |
| Overall L x W x H | 640 mm x 370 mm x 1,000 mm |
| Power | 550 W |
| Rating | Trade |
| Speed Range | 120 - 2,580 rpm (12) |
| Spindle Taper | 2 MT |
| Table Size | 310 mm |
| Table Tilt | 45° - 0° - 45° |
| Throat Depth | 165 mm |
| Voltage | 230 V |
| Plug Fitted | UK 3 pin plug |
