This extractor can be used in small home workshops for common wood machining tasks where a higher airflow than provided by a vacuum extractor is required.
The quiet running induction motor provides plenty of power to extract from many small workshop machines. The inlet diameter is 100mm(4"), the outlet into the bag is 100mm(4") and the airflow is sufficient to handle the majority of waste likely to be produced in the small home workshop.
A useful feature is that it can be used either on the floor or suspended from a sturdy wall using the two hanging brackets provided. A useful grab handle and castors allow easy mobility. Hose not supplied; see extraction hose selection for further details.
Please note that this is a chippings extractor and should not be expected to collect fine dust. As with all the high volume low pressure airflow machines, the inlet should not be restricted to below 75mm diameter and the bag should be emptied regularly. Spare bag provided.
Airflow | 850 m³/hr @ 100 mm |
---|---|
Bag Capacity | 37 litre |
Filter Performance | 30 micron |
Hose Diameter | 100 mm |
Model | AC37E |
Nett Weight | 22 kg |
Overall L x W x H | 1,100 mm x 380 mm x 415 mm |
Power | 750 W |
Rating | Craft |
Sound Power Level [Uncertainty K] | 70 dB(A) |
Voltage | 230 V |
Plug Fitted | 3 pin plug |