View Large Image
This is the largest extractor in our Craft range, which with its 1.5kW motor, large capacity collection bag and twin 100mm hose inlets, will handle most single workshop machines. Use the single 125mm inlet or the twin 100mm adaptor for two smaller machines.
The top cloth bag acts as the filter whilst the lower plastic bag collects the coarse dust and chippings. Plastic bags allow a number of bags to be filled and stored ready for bulk disposal. There are bag hooks to make changing a full bag easy. The extractor's filtration performance can be upgraded with the addition of the cartridge filter (700345). This has a large surface area of filter material, so does not reduce the airflow. A simple rotating handle is used to clean the filter.
For best results, keep the hose size to a minimum of 100mm; using a smaller diameter hose will cause the air flow to drop markedly. Castors on the base allow for easy mobility around the workshop.
This is a good, very solid, simple extractor. Lengths of suitable inlet hose are listed under Dust Extraction Accessories.
N.B. This machine uses waste sack size 785 x 1,200mm (501187).
| Airflow | 2,000 m³/hr @ 100 mm / 2,500 m³/hr @ 125 mm |
|---|---|
| Bag Capacity | 150 litre |
| Filter Performance | 30 micron >100% |
| Hose Diameter | 1 x 125 mm or 2 x 100 mm |
| Model | AC153E |
| Nett Weight | 48.5 kg |
| Overall L x W x H | 960 x 690 x 1,970 mm |
| Power | 1.5 kW |
| Rating | Craft |
| Sound Power Level [Uncertainty K] | 77 dB(A) |
| Voltage | 230 V |
| Plug Fitted | UK 3 pin plug |
