Free Click & Collect                    -                    Easy Returns


€390.00 Inc Vat


Axminster Hobby Series

  • Heavy duty cast iron bed ensures minimal vibration
  • Cast iron headstock and tailstock provide rigidity, strength and years of service
  • Hollow tailstock (9mm bore)
  • Quick release levers for easy positioning of tool rest and tailstock
  • Powerful 500W motor, quiet and smooth operation
  • Five spindle speeds from 500 to 3,150rpm
  • Tailstock barrel has 50mm of movement

See Alternative
Title Quantity Price Availability
Add To Basket Add to Wishlist

For those looking for slightly larger capacities and more motor power than is normally found in small bench top lathes (but still within a reasonable budget), this would be a great choice. Made almost entirely of cast iron, the bed of this lathe has a finely ground top surface and ensures stability and minimal vibration during operation.

The thick walled cast iron headstock and tailstock provide rigidity, and give years of trouble-free turning pleasure. The tailstock is hollow (9mm bore) allowing long-hole boring to take place using a standard long-hole boring auger, and features automatic ejection of centres. Quick release levers allow for easy and accurate positioning of tool rest and tailstock.

The lathe is powered by a 500W motor, which is smooth and quiet during operation. The spindle speeds range from 500 to 3,150rpm, with a choice of five belt ratios. The spindle nose has the very common 1" x 8tpi thread and a 2MT internal taper, so a large range of accessories is available.

Solid rubber feet help to eliminate movement whilst in operation. The tailstock barrel has 50mm of movement and includes a 2MT live centre. An additional bed extension is available, giving an extra capacity of 670mm between centres. This is a great lathe for those looking for that extra power and capacity, but retaining portability.

Supplied with Axminster drive and live centres, 150mm tool rest and 75mm faceplate.

N.B. The distance between centres will vary and be dependent on the type of centres or accessories used.

Axminster Hobby Series Rating

  • Where: Home, workshop, shed
  • Users: One person for light work
  • Spec: Lighter build spec, lower power
  • Annual use: Max 100 hours
  • Guarantee: 3 Years

Lower power ratings and tool capacities.

Lighter build specification.

Generally used for light work, occasionally heavy work, to the tool's limit.

Used in the home (garage, workshop, shed), kept dry, clean and well looked after.

Not part of the tool complement for income generation.

Very few (if any) continuous work periods.

Distance Between Centres 457mm
Max Diameter over Bed 305mm
Model AH-1218
Nett Weight 40kg
Overall L x W x H 820 x 280 x 440mm
Power 500W (230V)
Rating Hobby
Speed (5) 500-3,150 rpm
Spindle Taper 2MT
Spindle Thread 1" x 8tpi (Ref T04M)
Taper Tailstock 2MT
Tool Rest Stem Diameter 16mm
Clear All

Your Recently Viewed Products

Oops! Something went wrong there and we were unable to load the page you requested.

Sign Up